Independent study resource, not affiliated with NCEES, Pearson VUE, or any state licensing board. You register for the exams and pay their fees only at ncees.org. This site collects no logins and offers no downloads.

FE daily problem for October 12, 2026 (Groundwater: Darcy and wells)

This is the FE practice problem that Engineer Exam Lab members worked on October 12, 2026. The topic is groundwater: Darcy and wells, from the FE Environmental exam specification. Try it with the FE Reference Handbook open before you read on. The worked solution below gives the handbook section and page, the equation, every substitution with units, a size check, and the mistake behind each wrong answer.

The problem

Daily problem · FE Environmental, Groundwater: Darcy and wells

Two observation wells 1,150 m apart along the flow direction in a sand aquifer show a head difference of 10.0 m. The aquifer is 10 m thick and 460 m wide, with K = 14 m/d and effective porosity 0.28. Find the average seepage velocity of the groundwater, in m/d.

Enter your answer in m/d, 3 significant figures.

Handbook: Civil Engineering, Darcy's Law, FE Reference Handbook 10.6

Commit to an answer before you scroll. Writing the given values with their units first is the fastest way to spot what the question really asks for.

Worked solution, step by step

  • Answer: 0.435 m/d
  • Given: K = 14 m/d, dh = 10.0 m, L = 1,150 m, n = 0.28, A = 4,600, width = 460 m, thick = 10 m
  • Find: average seepage velocity (m/d)
  • Handbook: Civil Engineering, Groundwater, Darcy’s Law, page 298
  • Equation: q = -K dh/dx; v = q/n

Substitute, keeping the units on every value:

  1. i = dh/dx = 10.0/1,150 = 0.008696; A = 460 m × 10 m = 4,600 m²
  2. v = q/n = K·i/n = (14 m/d)(0.008696)/0.28 = 0.435 m/d

Result: 0.435 m/d, 3 significant figures.

Check: The seepage velocity is faster than the Darcy velocity because water moves only through the pores (v = q/n).

Common wrong answers and the mistake behind each

A fill-in question has no options to compare, so the usual wrong answers come from a slip in the setup. Each value below is what you get from one specific mistake:

  • 0.122 m/d: is the Darcy (specific) discharge q, not the seepage velocity.
  • 0.0341 m/d: multiplied by the porosity instead of dividing.

Where this is in the FE Reference Handbook

This problem uses Civil Engineering, Groundwater, Darcy’s Law, page 298 of FE Reference Handbook 10.6. The handbook is a free PDF in MyNCEES, and on exam day you search the same document on screen, so practice finding the section with the search box instead of from memory. Search for the name of the quantity you need, not the symbol, and check the page heading before you copy an equation.

How to approach problems like this

A fill-in question gives you nothing to compare against, so the habits that protect you are carrying units through every line, converting once at the start, and rounding only at the end. Enter the value in the units the question names. Before you submit, check the size of the result against the situation and confirm that the units reduce correctly; most wrong fill-in answers differ from the right one by a factor that a unit check would catch. Keep one more significant figure in the intermediate steps than you report in the answer, so rounding in the middle of the work does not move the last digit. If the problem mixes unit systems, pick one at the start, convert every given value into it, and write the converted values down before you substitute anything.

Whatever the result, log it. A short error log with one line per missed problem (the topic, the mistake named in the solution, and the handbook page) shows within a few weeks which habits cost you points, and it turns review time into targeted practice instead of rereading.

For ten more problems on this topic, each with a full solution, see the groundwater: Darcy and wells practice set. Every past daily problem is in the daily problem archive, one page per day.

Frequently asked questions

Is this a real FE exam question?

No. It is an original problem that our problem engine generated from the formulas in the FE Reference Handbook and checked by code before it was posted. Real exam questions are confidential, and the agreement every examinee accepts forbids sharing them.

Why does this problem appear here a day late?

Members of Engineer Exam Lab get each problem first, in the morning, and the worked solution the same evening. The problem and its solution come to this public archive the next day.

How should I use the worked solution?

Compare your work with it line by line, not only the final answer. If you picked a wrong answer, find the note that matches it above; each one names the exact mistake, which is the habit to fix before exam day.

Sources

  1. NCEES FE Reference Handbook 10.6 (free PDF in MyNCEES). Retrieved October 3, 2026.
  2. NCEES FE Environmental CBT exam specifications (PDF). Retrieved October 3, 2026.